Hey Im sure a lot of you have heard the drop in level once you take an audio mix down from nuendo.
My question is does any one know why this happens ? or is it just a pure lack in mixing.
I use a delta66 soundcard and i usually mix at 0db.
Id like to know how to tackle this problem.
Thanks to all who have the answers.
slicker.

From what I can understand it looks like you have your control room enabled & set up wrong. Disable it & see if it fixes the problem.

I dont have that problem, your mixing way to hot in my opinion if your mixing at 0

Slicker,

Check your connections/Output settings.
If you have "Control Room" enabled, then the output device should be set to Nothing.

Otherwise you will be hearing the Control Room output AND the Connections Output at the same time.

jmp