Studio Reviews    Studio Forums    Main Index  Hop To Forum Categories  DAW's, Computers & Software    Apogee A/D vs. ???? Any thoughts on this??
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Yondan
Picture of 1adam12
Posted
Fox suggested I start a new thread discussion on A/D converters. Sounds like a good idea.

I've heard a few songs in a project studio where the Apogee Rosetta was used as the A/D Converter and was shocked.

At a different project studio MOTU was used. Those songs were nice as well, however not quite the same as the Apogee setup.

I can't describe this accurately and there may be mitigating circumstances here as to the way these were recorded obviously, but has anyone used both and noticed a richer "stereo field" with Apogee? I forget which MOTU box was used -- the 8 something I think. 898? I'm too lazy to look it up :P

I have the Digi / E-MU converters now and I'm not really all that impressed -- everything seems very "flat" no matter what I try.








1-Adam-12, 1-Adam-12, see the man, see the man...
 
Posts: 1973 | Location: Redding, CA | Registered:: 03-17-06Reply With QuoteEdit or Delete MessageReport This Post
Yondan
Picture of 1adam12
Posted Hide Post
No thoughts on this? I'm told that the DAW makes little difference these days, it's all in getting the best A/D converter that you can. Getting the best data into the DAW.

Anyone, anyone... Beuller, Bueller.








1-Adam-12, 1-Adam-12, see the man, see the man...
 
Posts: 1973 | Location: Redding, CA | Registered:: 03-17-06Reply With QuoteEdit or Delete MessageReport This Post
Hoser
Godan
Picture of Bazz
Posted Hide Post
Buy a RADAR, just for the converters, get 24 ch's of better A/D than Apogee (in many ppl's opinion) and get a 24 trk recorder throw in with the deal Wink

Bueller has left the building.....
 
Posts: 2007 | Location: Victoria,BC Canada | Registered:: 03-01-04Reply With QuoteEdit or Delete MessageReport This Post
Now with 21% More Dirty!
Shichidan
Picture of dirtyragamuffin
Posted Hide Post
Re what bazz said, I only wish I could even come close to being able to afford even a beat up used RADAR rig!


Though FWIW yes, Apogees are that good--I find them sparkling clean, open, musical, even lively. I also wish I could afford them. (I've got the much more affordable RME ADI series converters instead--pretty good, but not quite as good as Apogee IMO--thing is Apogee costs 2-3x more and the RME stuff has already set me back several thousands! (and I'm still short 8 channelsRed Face)




__________________________________
Because I felt like it, you stupid machine.
 
Posts: 4108 | Location: sloshkosh, wi, usa, earth | Registered:: 09-01-03Reply With QuoteEdit or Delete MessageReport This Post
3rd kyu
Posted Hide Post
i'm super impressed with converters by Lynx, Mytek, and Lavry. we've got a Crane Song Hedd 192, and though it's only 2 channels, it sounds wonderful.
 
Posts: 109 | Location: long island | Registered:: 10-20-05Reply With QuoteEdit or Delete MessageReport This Post
Hoser
Godan
Picture of Bazz
Posted Hide Post
quote:
Originally posted by dirtyragamuffin:
Re what bazz said, I only wish I could even come close to being able to afford even a beat up used RADAR rig!



Well,..you do have a point. BUT, 24 ch's of RADAR A/D is still less than 24 of Apogee I reckon Wink
 
Posts: 2007 | Location: Victoria,BC Canada | Registered:: 03-01-04Reply With QuoteEdit or Delete MessageReport This Post
Kel
Calm Confidence Radiater
Sandan
Posted Hide Post
it might be an innacurate observation to compare completely different songs, done in different studios with all different components. I don't think you can pinpoint A/D or Apogee conversion as to the differences between the ttwo unless everything was the same then both ways of A/D were utilized. Although Apogee is very good, typically there are many reasons why something sounds remarkably better. A/D is way down on that list of reasons, but on the list nonetheless


that's my second favorite song of all time...everything else is tied for first though.
 
Posts: 998 | Location: S California | Registered:: 10-29-05Reply With QuoteEdit or Delete MessageReport This Post
Hoser
Godan
Picture of Bazz
Posted Hide Post
Good point, kel.

The other side of this is for those that are starting up working studios, high end project studios in which they hope to make their bread and butter, or some cash on the side, then the consideration of what their A/D is going to be is usually high on the list..I'm basing this on the cats, locally I've talked to, and I've talked to a few of them.

All this being said, I just have stock VS converters at this point LOL..but I don't have anything more than a songwriters studio at home. "Real" tracks, are done elsewhere and I'll just hump some of the better gear I have with me.
 
Posts: 2007 | Location: Victoria,BC Canada | Registered:: 03-01-04Reply With QuoteEdit or Delete MessageReport This Post
Yondan
Picture of 1adam12
Posted Hide Post
Point taken on the different songs vs. different converters -- I did throw that caveat in there though. One was using Nuendo the other DP, both on G5s I believe - may have been G4. I wasn't actively persuing any new gear at that point, was just checking out the little studios.

Yeah, RADAR would be nice... There are a few (very few) used ones I've seen out and around from 6 to 10k. Then of course tack on the DAW.... Blah Blah Blah... expensive.

I've heard though that IZ is a fantastic tech support company from several people and that they will upgrade the old RADAR 24 boxes - or maybe all the old boxes, new processor, RAM, etc.

Sorry guys... Analysis Paralysis, too afraid to spend money and make a mistake :P But thanks for suggestions/help... keep it coming, I need all the support I can get :P

-A








1-Adam-12, 1-Adam-12, see the man, see the man...
 
Posts: 1973 | Location: Redding, CA | Registered:: 03-17-06Reply With QuoteEdit or Delete MessageReport This Post
Now with 21% More Dirty!
Shichidan
Picture of dirtyragamuffin
Posted Hide Post
quote:
Originally posted by Bazz:

Well,..you do have a point. BUT, 24 ch's of RADAR A/D is still less than 24 of Apogee I reckon Wink


The way I figure it (since I already have a console and plenty of outboard),

Alesis HD24 + 3 RME ADI-8s = about $6,000

Alesis HD24 + 3 Apogee Rosetta 800s = about $10,000

RADAR classic plus = $15,000

Summary: good, better, best -or- expensive, expensive as hell, pretty goddamn expensive Juggle




__________________________________
Because I felt like it, you stupid machine.
 
Posts: 4108 | Location: sloshkosh, wi, usa, earth | Registered:: 09-01-03Reply With QuoteEdit or Delete MessageReport This Post
Hoser
Godan
Picture of Bazz
Posted Hide Post
Ah, pardon me..I thought that Apogee Rosetta's were more than that. I haven't looked in awile as I haven't had the need.

I guess my RADAR comment was based on that fact that I was offered a Classic 24 for 10K CDN awhile back..Maybe b/c they're a local company, there's more around? Dunno.

All I know is that for some stuff I'm working on right now, there's 3 studios I have in mind, all have RADAR.

I'll tell you this much. If I had a Rosetta 800 or 3 dropped in my lap, I'd be --> Big Grin <-- I could careless about the guys that say RADAR is better..
 
Posts: 2007 | Location: Victoria,BC Canada | Registered:: 03-01-04Reply With QuoteEdit or Delete MessageReport This Post
Now with 21% More Dirty!
Shichidan
Picture of dirtyragamuffin
Posted Hide Post
Oh yeah I hear you--at that level it's what shade of "great" you want.


I'll tell you if a RADAR classic plus (with the controller) dropped in front of me for 5 grand I'd sell the stuff I have now and be all over it. But at 15 large new...damn that's a spicy meataballuh Bricks




__________________________________
Because I felt like it, you stupid machine.
 
Posts: 4108 | Location: sloshkosh, wi, usa, earth | Registered:: 09-01-03Reply With QuoteEdit or Delete MessageReport This Post
Yondan
Picture of 1adam12
Posted Hide Post
I was sort of thinking something simple(er).

A G5 with Apogee Ensemble: http://www.apogeedigital.com/products/ensemble.php

Add UAD DSP plugs (when the PCI-e gets resolved, etc).

Supposedly the same converters as Rosetta.

Try to go completely virtual? I don't know.








1-Adam-12, 1-Adam-12, see the man, see the man...
 
Posts: 1973 | Location: Redding, CA | Registered:: 03-17-06Reply With QuoteEdit or Delete MessageReport This Post
Sandan
Posted Hide Post
Thats really up to you. Apogee Ensemble sounds like a good deal, but its not really used and tried with reviews to consider no??
With the ensemble it will say what DAW you should use -at this point. Do you use Logic now? If not , it could be a whole new ball o wax!! Are you ready to move to a MAC in general?
Choose your environment, then consider the convertors IMO.

T
 
Posts: 818 | Location: San Diego | Registered:: 02-24-03Reply With QuoteEdit or Delete MessageReport This Post
Now with 21% More Dirty!
Shichidan
Picture of dirtyragamuffin
Posted Hide Post
Hah, sorry we derailed your thread, 1adam12!


The Ensemble pacakge looks nice, but tonio makes good points--is your DAW ready for it?




__________________________________
Because I felt like it, you stupid machine.
 
Posts: 4108 | Location: sloshkosh, wi, usa, earth | Registered:: 09-01-03Reply With QuoteEdit or Delete MessageReport This Post
Hoser
Godan
Picture of Bazz
Posted Hide Post
I was also intrigued by the ensemble but then read it's only for MAC's Frown
 
Posts: 2007 | Location: Victoria,BC Canada | Registered:: 03-01-04Reply With QuoteEdit or Delete MessageReport This Post
Balance.
Yondan
Picture of Skeetch
Posted Hide Post
The RADAR's do rock. And depending on the way you want to work, a DAW doesn't necessarily have to be tacked on. I used my RADAR for nearly three years for both tracking and mixing - for "mastering" or CD burning I'd fly the two track WAV's in to Sound Forge or CD Arcitect. AcidPro 6 just released and it's got many DAW-like features. I've been playing around with it for the past couple of weeks and I have to admit that the prospect of automation and recall is most intriguing. I'm considering tracking to RADAR then flying tracks out to Acid for editing for those clients that want or need that kind of thing.

Just my two pence, but I'd place conversion a tad higher on the list that some folks - be it RADAR, Apogee, Mytek, Benchmark, whatever. While there's certainly no substitute for a well crafted, well performed song, all the nuance of your outboard can be affected by how well (or poorly) the conversion gets it into the recording medium. Of course, not to be forgotten is how one uses that outboard. Proper mic placement, outboard selection, a good sounding room, overall skills etc, all play important roles.


______________________________
"The power of accurate observation is commonly called cynicism by those who have not got it..." George Bernard Shaw

Acid Planet Artist Page
 
Posts: 1238 | Location: Ida Ho Hum | Registered:: 02-03-03Reply With QuoteEdit or Delete MessageReport This Post
Yondan
Picture of 1adam12
Posted Hide Post
That's what I've always heard -- well recently anyway -- is that converters make or break the project. If you get a Rosetta or two or a RADAR, then you're in good shape right out of the box.

Once again it sort of sounds like the tired old Chevy Vs. Ford argument. I've heard guys stack their Rosettas up against the Nyquists and Graces, etc. Disclaimer - I've never seen a Grace Designs in action, thought they only made the small portable pre w/ AD conversion... So... what can ya do? :P

My guess is that you just buy the best converters you can afford that are of Pro Audio quality and you should be safe, no?








1-Adam-12, 1-Adam-12, see the man, see the man...
 
Posts: 1973 | Location: Redding, CA | Registered:: 03-17-06Reply With QuoteEdit or Delete MessageReport This Post
Yondan
Picture of Wireline
Posted Hide Post
I would agree with this...get the best you can afford...

FWIW: Great recordings have been made on POS ADATs, bigger POS Tascam DA88s, biggest POS Akai DR4, etc...conversion, while an important element, is not as critical as mic choice/placement, pres, etc...and the person operating all that stuff.

2d FWIW: I've seen/heard the S-Nyquist Radar in action, and yes, it is a wonder to behold...if I had the cash, there would be one in here tomorrow...BUT the best ADDA on the planet doesn't mean squat if your monitor system is incapable of reproducing the often miniscule differences between say a Radar and a FF800...

3rd FWIW: I have heard a Williams modded HD24...gives the Radar a serious competitor at a fraction of the cost...doesn't have the 'star appeal' that a Radar has, though...

4th (and last) FWIW: Only YOU can decide what is the best sounding conversion, based on your needs, your chain (from mic to playback speakers), to your finances. Find the balance point between cost and sound, and work from there. Many hits have been launched from RME, Digidesign, Frontier Design, Apogee, Mytek, Lavry, Mackie, Prism, MOTU, Cranesong, and even Alesis and Behringer...


If Its Not A Good Idea, Then Why Am I Risking A Career With It?
 
Posts: 1392 | Location: Midland, TX | Registered:: 09-01-03Reply With QuoteEdit or Delete MessageReport This Post
Dot
Mod
Kyudan
Picture of Dot
Posted Hide Post
1adam12, what's your budget and how many channels of converters do you need?


---------------------------
Dan Richards
The Listening Sessions
---------------------------
 
Posts: 6429 | Location: on the beach in warm, sunny SC | Registered:: 12-26-02Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community Page 1 2  
 

Studio Reviews    Studio Forums    Main Index  Hop To Forum Categories  DAW's, Computers & Software    Apogee A/D vs. ???? Any thoughts on this??

All rights reserved © 2002-2009 Studio Forums